Damper Actuator,180 in-lb,Spring Return,24V,On/Off,SWApplication | For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05? in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. Maximum of two AF?s can be piggybacked for torqu |
---|
Servicing | maintenance free |
---|
Power Supply | 24 VAC�20%, 50/60Hz, 24 VDC+20%/-10% |
---|
Power Consumption Running | 5 W |
---|
Power Consumption Holding | 2.5 W |
---|
Transformer Sizing | 7.5 VA (class 2 power source) |
---|
Electrical Connection | (2) 3 ft [1 m], 18 GA appliance cables with 1/2? conduit connectors |
---|
Overload Protection | electronic throughout 0� to 95� rotation |
---|
Angle of Rotation | 95� (adjustable with mechanical end stop, 35� to 95�) |
---|
Direction of Rotation (Motor) | reversible with CW/CCW mounting |
---|
Manual Override | 5 mm hex crank (3/16? Allen), supplied |
---|
Running Time (Motor) | <75 sec |
---|
Ambient Temperature Range | -22�F to +122�F [-30�C to +50�C] |
---|
Storage Temperature Range | -40�F to +176�F [-40�C to +80�C] |
---|
Housing | NEMA 2, IP54, UL enclosure type 2 |
---|
Agency Listings | cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC |
---|
Noise Level (Motor) | �50 dB (A) |
---|
Direction of Rotation (Fail-Safe | reversible with CW/CCW mounting |
---|
Position Indication | visual indicator, 0� to 95� (0� is full spring return position) |
---|
Running Time (Fail-Safe) | 20 sec @ -4�F to +122�F [-20�C to +50�C], < 60 sec @ -22�F [-30�C] |
---|
Noise Level (Fail-Safe) | <62 dB (A) |
---|
Housing Material | zinc coated metal and plastic casing |
---|
Electrical protection | actuators are double insulated |
---|
Humidity | max. 95% RH non-condensing |
---|
Auxiliary Switch | 2 x SPDT, 3A resistive (0.5A inductive) @ 250 VAC, one set at +10�, one adjustable 10� to 90� |
---|
Shaft Diameter | 1/2? to 1.05? round, centers on 1/2? and 3/4? with insert, 1.05? without insert |
---|
Torque | 180 in-lbs [20 Nm] minimum |
---|
AF-P | Anti-rotation bracket AF/NF. |
---|
SH8 | Push rod for KG6 & KG8 ball joints (36? L, 5/16? diameter). |
---|
ZG-100 | Univ. right angle bracket (17? H x 11-1/8? W x 6? base). |
---|
ZG-101 | Univ. right angle bracket (13? H x 11? W x 7-7/16? base). |
---|
ZG-DC1 | Damper clip for damper blade, 3.5? width. |
---|
ZG-DC2 | Damper clip for damper blade, 6? width. |
---|
ZS-100 | Weather shield - galvaneal (13? L x 8? W x 6? D). |
---|
ZS-150 | Weather shield - PC w/ foam seal (16? L x 8-3/8? W x 4? D). |
---|
ZS-260 | Explosion proof housing. |
---|
ZS-300 | NEMA 4X, 304 stainless steel enclosure. |
---|
TOOL-06 | 8 mm and 10 mm wrench. |
---|
AV8-25 | 9.8? shaft extension for 5/16? to 1? diameter shafts. |
---|
PS-100 | Actuator power supply and control simulator. |
---|
ZG-X40 | 120 to 24 VAC, 40 VA transformer. |
---|
ZG-102 | Dual actuator mounting bracket. |
---|
IND-AFB | AFB(X)/NFB(X) position indicator. |
---|
KG8 | Ball joint for 5/16? diameter rod, 90�, galvanized steel. |
---|
KH-AFB | AFB(X)/NFB(X) crankarm (with 3/4? dia. shaft pass through). |
---|
ZG-AFB118 | AFB(X)/NFB(X) crankarm adaptor kit. |
---|
KG10A | Ball joint for 3/8? diameter rod, zinc plated. |
---|
KH10 | Univ. crankarm, slot 21/64? w, for 9/16? to 1? dia. shafts. |
---|
SH10 | Push rod for KG10A ball joint (36? L, 3/8? diameter). |
---|
ZG-120 | Jackshaft mounting bracket. |
---|
ZG-JSA-3 | 1.05? diameter jackshaft adaptor (12? L). |
---|
TF-CC US | TF-CC US Cable conduit connector, 1/2?. |
---|
ZG-109 | Right angle bracket for ZS-260. |
---|
ZG-110 | Stand-off bracket for ZS-260. |
---|
ZG-JSA-1 | 1? diameter jackshaft adaptor (11? L). |
---|
ZG-JSA-2 | 1-5/16? diameter jackshaft adaptor (12? L). |
---|
ZS-101 | Base plate for ZS-100. |
---|
ZS-300-5 | NEMA 4X, 316L stainless steel enclosure. |
---|
ZS-300-C1 | 1/2? shaft adaptor, standard wtih ZS-300(-5). |
---|
ZS-300-C2 | 3/4? shaft adaptor for ZS-300(-5). |
---|
ZS-300-C3 | 1? shaft adaptor for ZS-300(-5). |
---|
K7-2 | Standard AFB(X)/NFB(X) clamp (1/2? to 1.05?). |
---|
KH12 | Univ. crankarm, slot 21/64? w, for 3/4? to 1? dia. shafts. |
---|
KH8 | Univ. crankarm,slot 21/64? w,for 3/8? to 11/16? dia. shafts. |
---|
Z-AF | Classic AF/NF to AFB(X)/NFB(X) retrofit mounting bracket. |
---|
ZG-118 | AFB(X)/NFB(X) U bracket (5-7/8? H x 5-1/2? W x 2-19/32? D). |
---|
ZG-AFB | AFB(X)/NFB(X) crankarm adaptor kit. |
---|
Operation | The AF..24-S series actuators provide true spring return operation for reliable failsafe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The AF..24-S series provides 95� of rotation and is provided with a graduated position indicator showing 0� to 95�. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The AF..24-S versions are provided with two built-in auxiliary switches. These SPDT switches are provided for safety interfacing or signaling, for example, for fan start-up. The switching function at the fail-safe position is fixed at +10�, the other switch function is adjustable between +10� to +90�. The AF..24-S actuator is shipped at +5� (5� from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off. |
---|
Typical Specification | On/Off spring return damper actuators shall be direct coupled type which
require no crank arm and linkage and be capable of direct mounting to a
jackshaft up to a 1.05? diameter. The actuators must be designed so that they
may be used for either clockwise or counter clockwise fail-safe operation.
Actuators shall be protected from overload at all angles of rotation. If required,
two SPDT auxiliary switch shall be provided having the capability of one being
adjustable. Actuators with auxiliary switches must be constructed to meet
the requirements for Double Insulation so an electrical ground is not required
to meet agency listings. Actuators shall be cULus listed and have a 5 year
warranty, and be manufactured under ISO 9001 International Quality Control
Standards. Actuators shall be as manufactured by Belimo. |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|